The small batch brewers dream pump! The Anvil Brewing Pump is perfect for recirculating and transferring wort. This economical pump is packed with features for an affordable price. Ideal for recirculation and transferring, the Anvil Brewing Pump has a head that is easily disassembled without the need for tools! It has an inlet and outlet that accept 1/2 in. tubing, which means this pump can be used in a plethora of brewing systems with standard 1/2 in. barbed connections! Easily turn the pump on and off with an in-line switch, making this pump a breeze to use!
Tool-free Disassembly.
Quiet Operation.
In-line Switch
6 ft. Cord
Sized for 1/2 in. Hoses.
Max Flow - 3 GPM
Max Lift - 7 ft
Voltage - 120V 60Hz
Current - 0.75A
The BrewBuilt Chilling Pump Kit includes everything you need to push glycol or ice water through your chilling coil or jacketed tank. It includes an Inkbird temperature controller to make it easy to hold your temps. Available with either a 800 or 1300 GPH submersible pump. In general we recommend the 800 GPH pump for use with any batch size fermentation less than 10 gallons, and the 1300 GPH pump for any batch size fermentation between 10 gallons and 2 bbl.
Kit Includes:
Submersible Pump
Inkbird Dual Stage Digital Temperature Controller
2x 5 ft. lengths of 3/8" SiliconeTubing
4x Butterfly Hose Clamps
Stainless 3/8" Barb x 1/2" MPT
An amazing little pump from "down under". It has been used in the Australian market for years where it has a good reputation. Works like a March or a Chugger but with a sealed case that is more water resistant. The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations. The optional stainless steel head (PMP501) is a very nice upgrade and one that most customers choose.
Specifications:
Made from food-grade heat-resistant SPS
110v/60hz
11.15 ft. (3.4 m) max head
5 Gal/min max flow
Rotatable pump head
Max temperature - 248 F/ 120 C
1/2 inch fittings
An amazing little pump from "down under". It has been used in the Australian market for years where it has a good reputation. Works like a March or a Chugger but with a sealed case that is more water resistant. The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations. The included stainless steel head is a very nice upgrade.
Includes Stainless Steel pump head for the MKII pump AND spare standard high temp polysulphone head!
Specifications:
Made from Polysulfone
110v/60hz
11.15 ft. (3.4 m) max head
5 Gal/min max flow
Rotatable pump head
Max temperature - 248 F/ 120 C
1/2 inch fittings
The RipTide™ pump - built from the ground up as a homebrewing pump! $199.99. Includes valve and base - a $50 retail value!
Gone are the days of making do with a general purpose pump such as the March 815 and all the variant imported copies. These pumps are cumbersome to disassemble, difficult to prime to get the wort moving, require the addition of a valve, a switch, and a proper base to hold the pump upright. They also use noisy open motors that must be shielded from liquids. All undesireable attributes for a homebrewing pump! The team of homebrewers at Blichmann Engineering and our friends at March Manufacturing have created the RipTide™ to solve all of these problems!
The all new RipTide™ is the very first pump designed specifically for homebrewing! We've solved the problems that have plagued homebrewers for years!
High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of pressure head!
Tri-clamp head connection fully disassembles in seconds for easy cleaning
1/2" NPT inlet and outlet connections
Totally enclosed motor is splash proof and super quiet (50 dB)
Integral linear flow valve for superior flow control - don't spend more money for a separate valve and fittings. A separate valve and fittings can easily cost you an additional $25-35!
Integral air vent valve and partially enclosed impeller design allows you to prime the pump in seconds- no more frustrating air locked pumps!
Stainless steel head rotates 360 degrees to fit in virtually any installation
Large stable base with protective rubber feet keeps the pump from tipping - a $25 retail value included!
Convenient power switch on the base
Includes a 10ft long cord with plug (120V)
Base acts as a cord wrap for convenient storage
Assembled in USA from USA and imported components
Patent pending
RipTide™ is the last homebrew pump you'll need!
Stainless Steel pump head updgrade for the MKII pump, sku PMP500. With the pump (that inlcudes standard polysulphone head) and this stainless head you are still looking at a retail price point under $99.
This is a submersible pump is perfect for use with a glycol chiller or icebank. It has a small, compact design but can still push up to 800 gallons per hour. Comes with interchangeable 1/2 in. and 3/4 in. plastic barbs.
We recommend this pump for maintaining the temperature of any batch size fermentation that is less than 10 gallons.
Maximum flow rate: 800 GPH
Max lift height: 9 ft.
Comes with 2 barb fittings - 1/2" & 3/4"
High quality 60W motor runs quiet
Stainless steel impeller shaft
6 ft. long power cord
