Products

This 2.5 Gallon Ball Lock Corny Keg is of superior quality, with a 130psi working pressure, and orbital-welded craftsmanship. The stainless steel finish is extra smooth, providing a reliable, sanitary construction. The black rubber also ensures the keg won’t damage your home surfaces, making it perfect for use indoors. These Premium 2.5 gal kegs have a lid with an internal tab/hook under the lid designed specifically for attaching dry hopping bags. Features: 130 PSI Operating Pressure 2.5 Gallon (9.5 L) Capacity Dry Hop Tab Welded into Lid 304 Stainless Steel Dimensions: Height: 14.5 in. Diameter: 8.375 in.

Read more less

This 4-Way Gas Distributor without PRV allows for uniform gas pressure to be dispensed from multiple kegs and is easily installed in any convenient location with the integrated wall-mount bracket. Gas manifolds create a draft dispensing system to quickly serve beer or other beverages, so you can ensure the perfect flavor every time. Specifications Perfect for dispensing up to four different beer kegs at the same output pressure. These Valves are without check valve mechanism.  Made of Aluminum. Durable and light. Stainless Steel 304 Wall Mounting Hardware Included. 5/16″ ID gas hose suitable for 3/8″ Barb. Valves working and maintenance are easy because of tilted design. Valve Material Brass Body Material Aluminium Outlet Connection 3/8" Barb (To fit 5/16" ID gas hose) C2121-100 Inlet Connection 3/8" Barb (To fit 5/16" ID gas hose) C2121-100 Performance 1 Pressure / 4 Keg Type Air Distributor PRV - Pressure Release Valve Not Included Standard Packing 4

Read more less

These premium brand new Kegland ball lock kegs are rated to 130psi working pressure and are made using a robotic orbital welding machine. The finish on these kegs are far superior to our other economy stainless steel kegs and are made with super smooth welds making them sanitary and easier to clean. The black rubber on these kegs also make them a little nicer to use around your house as they are less likely to damage your tile floors or crack plastic lining inside your kegerator. These Premium 5 gal kegs have a lid with an internal tab/hook under the lid designed specifically for attaching dry hopping bags. Features: Ball lock 130 PSI Operating Pressure 5 Gallon (19 L) Capacity Dry Hop Tab Welded into Lid 304 Stainless Steel NSF Certified Dimensions: Height: 24.75 in. Diameter: 8.375 in.

Read more less

White, gas in quick disconnect with barb for gas line.Barb is 1/4". 1/4" or 5/16" beverage tubing is recommended for gas line.Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Read more less

This Black Washer/Gasket fits beer shanks and Sanke couplers, providing a reliable seal for your homebrew system. Crafted from a flat black material, this black beer washer ensures no leakage while also staying secure for long-term use.

Read more less

Powered by Quiescent Flow Technology™, this revolutionary bottle filler eliminates the complicated and time-consuming operation of traditional counter-pressure fillers while maintaining their primary functions—purging with CO2, preventing oxygen pickup, and filling with minimal foaming and carbonation loss. Pair that with its auto-fill level and ability to fill bottles of any depth without modification, and the BeerGun® becomes a clear standout. Key features include: One-handed, intuitive operation Simpler operation than counter-pressure fillers Easy to set up and clean Everything that touches your beer is stainless steel Low-foaming outputs Great for kegs or bottling buckets Works for wine-makers The BeerGun® takes aim at the common problems of counter-pressure fillers and offers one-of-a-kind solutions powered by our patented Quiescent Flow Technology™. Turbulence and sudden changes in pressure can create unwanted foaming. The unique design of Blichmann's BeerGun® gradually reduces beer from keg pressure to atmospheric pressure with little turbulence and provides a consistent bottle fill level every time. While competitors place their valves at the top of the filler and force beer down an empty tube each time, we've placed our non-throttling, quick-acting valve at the bottom of the BeerGun® so it is quickly immersed in the beer, keeps the stem full, and reduces pressure changes and turbulence. These features plus the CO2 jacketing tube for bottle purging and ergonomic valve actuators make filling bottles faster, easier, and more precise.

Read more less

The Cannular is a manual can seamer that is easy to use, reliable, and beautifully simple. Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 5 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs. Operation:The beauty of the Cannular lies in how truly simple it is to operate. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine.The seaming process is as follows: Place lid atop the can and place the can on the table spacer Turn the platform lever clockwise to raise the can to the seamer Press the button to turn the machine on and begin spinning the can Push the seaming lever away from you and hold for 1-2 seconds Pull the seaming lever towards you and hold for 1-2 seconds Press the button to turn off the machine and stop spinning the can Turn the platform lever counterclockwise to lower the can

Read more less

Plastic quick disconnects for ball lock Cornelius-type kegs.Black quick disconnects are used for the liquid out tank plug.1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

Read more less

Plastic quick disconnects for ball lock Cornelious-type kegs.Gray quick disconnects are used for the gas in tank plug.1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

Read more less

Industry standard faucet for draft beer that fits North American shanks and towers. Chrome plating looks sharp and will keep your bar or kegerator looking amazing. Brass body with quick action brass lever. A great choice for replacing a worn out faucet. Specifications: Body Thread: 1 1/8” – 18 Thread (North American Beer Industry Standard) Lever Thread: 3/8” – 16 UNC (Unified Coarse Thread) Chrome Plated Brass Body Brass Lever

Read more less

Beverage Tubing - 5/16 in.

Read more less

This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required. Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing.  Features: Ball Lock Quick Disconnect - Gas In Direct connect EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning

Read more less

The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required. Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing.  Features: Ball Lock Quick Disconnect - Bev Out Direct connect EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Dissamble by hand for quick and easy cleaning

Read more less

The BlowTie 2 Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the BlowTie's integrated pressure gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) CM Becker Gray Ball Lock Disconnect Duotight Flare Fitting 8 mm OD Rigid Plastic Joiner

Read more less

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718). The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-15 psi WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

Read more less

The Blow Tie Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the included Push-In Pressure Gauge. The kit includes everything you'll need to use the spunding valve right out of the bag.   Kit Includes: BlowTie Pressure Gauge (0-40 psi) Ball Lock Disconnect Duotight Tee & Flared Duotight Fitting 2x Lengths of EVABarrier 8mm OD Tubing

Read more less

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718). The blow off pressure can be set by either pairing the BlowTie with the Push-In Pressure Gauge (D1160), or by attaching it to an empty keg that has been pressurized to the desired psi.    Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends 0-40 psi pressure rating

Read more less

These regulators work great for reducing your mains pressure from 0-150 psi. Suitable for both gas and liquid. 8 mm Duotight inlet and outlet compatible with EVABarrier tubing. Handy tee bar adjustment. Specifications: Pressure Range: 0–150 psi Suitable for mains water pressure Liquid and gas compatible Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Wall mountable Made from non-corrosive acetyl, nitrile, and stainless parts

Read more less

The Duotight In-Line regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing.  Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-60 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

Read more less

This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects. It can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)  Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Ball lock fitting and regulator not included.

Read more less

This Duotight to Female Beer Thread fitting can be used to connect beverage line to faucet shanks instead of a tailpiece, and it's also a convenient option for connecting gas and beverage line to the gas in and bev out on keg couplers. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)  Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Faucet shank and keg coupler not included.

Read more less

This Duotight fitting makes it easy to split your gas line and run it to multiple kegs. Use one tee for a dual tap kegerator or two tees for a triple tap. You can also pair the tee with the Push-In Pressure Gauge to use the gauge with the BlowTie Spunding Valve. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)  Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.

Read more less

EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings.   The 5 mm (13/64") ID size is perfect for draft applications where a longer beverage line is needed. We recommend using 10-12 ft. per line for adequate flow resistance.   Specifications: Inner Diameter - 5 mm (13/64") Outer Diameter - 8 mm (5/16") 12 m Roll (39 ft.) PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up  *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.

Read more less