Good to have you here!
Our shop uses cookies. By clicking on Accept you are agreeing to our terms of service and privacy policy.
Products
Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. Flare
This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects. It can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Ball lock fitting and regulator not included.
$5.99
-
Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread
This Duotight to Female Beer Thread fitting can be used to connect beverage line to faucet shanks instead of a tailpiece, and it's also a convenient option for connecting gas and beverage line to the gas in and bev out on keg couplers. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Faucet shank and keg coupler not included.
$6.99
-
EVABarrier Tubing - 5 mm ID x 8 mm OD - By the Foot
EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 5 mm (13/64") ID size is perfect for draft applications where a longer beverage line is needed. We recommend using 10-12 ft. per line for adequate flow resistance. Specifications: Inner Diameter - 5 mm (13/64") Outer Diameter - 8 mm (5/16") 12 m Roll (39 ft.) PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.
$1.99
-
New Replacement Corny Keg (Soda Keg) Lid
We love these keg lids as either a replacement or an upgrade to the stock lid featured on many homebrew kegs. Most homebrew kegs feature a straight, parallel bale that sits extemely close to the lid when in the closed position. So close that it can be hard to get a finger or two under the bale to open it. The arms on this lid bend outward creating a nice, easy-to-grip handle to open and close the bale. For use with Torpedo, Cornelius, and Firestone kegs. Comes with a pull-ring pressure relief valve and o-ring. PRV rated to 85 psi.
$21.99
-
Push-In Pressure Gauge 0-40 psi - 5/16" (8 mm)
This push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. It's the ideal companion to the BlowTie Diaphragm Spunding Valve, allowing you to dial in your blow off setting for pressure fermentations or pressure transfers. Triple-scaled to read in psi, bar, and kPa.
$8.99
-
Sanke to Ball Lock Adapter Kit
Brand new stainless connectors that fit perfectly on your d ring tap. These are stainless steel and a high quality. Caps are also marked to ensure the correct connector for gas or liquid is used.
$29.99
-
Two Piece Reusable Bung (Party Star Keg)
Our Two Piece Reusable Bung (Party Star Keg) is a reliable, airtight seal that preserves flavor, carbonation, and freshness. It fits securely and is easy to use. Craft beer lovers can keep their brews tasting as great as the day they were poured!
$1.99